車用空調焓差臺

Automotive air-conditioning enthalpy difference

適用于汽車空調制冷系統及各部件 (包括蒸發器、冷凝器、壓縮機)的性能進行測試；還可對暖風裝置/水箱散熱器/油冷器/中冷器的性能進行測試；也可對HVAC裝置進行測試研究。車用空調焓差臺可作為汽車空調器/換熱器性能的檢定裝置，

Suitable for automotive air conditioning refrigerating system and components (including evaporator, condenser, compressor performance test; But also on the heater/radiator radiator/oil cooler/cold, the performance of the test; Test research can also be used for HVAC equipment. Automotive air-conditioning enthalpy difference can be used as automobile air conditioner/heat exchanger performance test device,

一、試驗室概要

A summary and lab

本試驗室適用于汽車空調制冷系統及各部件 (包括蒸發器、冷凝器、壓縮機)的性能進行測試；還可對暖風裝置/水箱散熱器/油冷器/中冷器的性能進行測試；也可對HVAC裝置進行測試研究。它可作為汽車空調器/換熱器性能的檢定裝置，也為開發、優化空調系統/熱交換系統提供了手段。本裝置能控制和測量與各試驗相關的風側/制冷劑側/水側/油側/熱空氣側的參數，有利于對試驗結果的分析；整個試驗過程由計算機控制，并具有自動記錄和打印數據等的功能。

This laboratory is suitable for automotive air conditioning refrigerating system and components (including evaporator, condenser, compressor performance test; But also on the heater/radiator radiator/oil cooler/cold, the performance of the test; Test research can also be used for HVAC equipment. It can be used as automobile air conditioner/heat exchanger performance test device, also for the development, optimization of air-conditioning system/heat exchange system provides the means. This device can control and measure the wind side associated with each test/refrigerant/oil/water side side/hot air side of the parameters, is conducive to the analysis of test results; The whole test process is controlled by computer, and has the function of automatic recording and print data.

試驗室采用模塊式結構，各模塊相對獨立又可方便地進行組合，這種組合均由本試驗裝置的控制系統自動完成，能方便靈活地進行各種類型的試驗。當你通過計算機選擇了一種試驗功能后，計算機即可告訴你還可進行什么試驗，供你選擇。由于本試驗裝置可同時進行二種試驗，設備投資雖有所增加,但大大提高了試驗臺的利用效率和性能價格比，便于進行試驗的組織。

Laboratory USES the modular structure, each module is relatively independent and can easily for best combination, this combination are completed by this experimental device of automatic control system, convenient and flexible to various types of tests are carried out. When you chose a test by computer, the computer can tell you what also can carry on test, for your choice. Due to the test rig can be two kinds of tests are carried out at the same time, the equipment investment is increased, but greatly improve the efficiency of the test bed and price performance ratio, to facilitate testing organizations.

本試驗室的所有控制操作均在主控計算機上進行，一拖二設計，一臺主控制計算機同時控制二種試驗的進行。主控計算機有二臺顯示器，可同時獨立地顯示二種試驗的所有資訊?？刂栖浖峁?qiáng)大的實時數據歷程的顯示和操作，便于對試驗過程進行分析研究，這些過程數據均可長期保存和離線查閱。

The laboratory of all control operations are conducted on the main control computer, yituo two design, a main control computer control two test at the same time. There are two main control computer monitors, can independently at the same time shows two test all of the information. Process control software provides a powerful real-time data display and operation, easy to research and analyze the test process, the process can be long-term preservation and offline access to data.

全部試驗過程均全自動進行，但同時具有手動操作功能，兩種操作方式可方便地轉換。

All are fully automatic test process, but also has the function of manual operation, the two operating modes can be easily converted.

本裝置還可以提供電動壓縮機測試的功能。本試驗室能控制和測量與各試驗相關的空氣側及制冷劑側的參數，具有自動和手動二種運行模式，其測試準確度為±2％，再現性精度可達到±1%。

This device can also provide the function of the electric compressor test. Our laboratory can control and measure the air side associated with each test and the parameters of the refrigerant, with automatic and manual two kinds of operation mode, the test accuracy of plus or minus 2%, reproducibility precision can reach + / - 1%.

二、試驗室布局

Second, the laboratory layout

試驗室的布局簡要說明如下：

The layout of the laboratory are briefly stated below:

散熱器B室：含空氣處理裝置一套，風洞一套，冷凝器試驗輔助系統一套；

Radiator room B: including air handling unit, a set of wind tunnel, a set of condenser test a set of auxiliary system;

蒸發器A室：含空氣處理裝置一套，風洞一套，壓縮機箱一套，蒸發器試驗輔助系統一套，出風口風量測試裝置一套；

Evaporator room A: including air handling unit, A wind tunnel, A compression case, evaporator test A set of auxiliary system, air outlet of A set of test devices.

蒸發器C室：含空氣處理裝置一套，雙向風洞一套；

C evaporator: it contains a set of air treatment device, two-way wind tunnel a;

1.試驗項目及能力范圍

1. The test items and abilities

系統試驗（單蒸和雙蒸）： 1,750～14,000 W(**冷)

Steam steaming system test (single and double) : 1750 ~ 1750 W (cold) * *

冷凝器試驗： 2,600～21,000 W(散熱)

Condenser test: 2600 ~ 21000 W (heat)

蒸發器A試驗： 8,00～10,000 W(制冷)

Evaporator A test: 8, 00 ~ 10000 W (refrigeration)

蒸發器C試驗： 1,750～ 14,000 W(制冷)

Evaporator C test: 1750 ~ 1750 W (refrigeration)

壓縮機試驗： 800～10,000 W(制冷)

Compressor test: 800 ~ 10000 W (refrigeration)

暖風裝置試驗： 1,750～14,000 W(制熱)

Heater test: 1750 ~ 14000 W (heating)

HVAC試驗

HVAC test

水箱散熱器試驗：20,000～150,000W(制熱，水/氣、乙二醇/氣)

Tank radiator test: 20000 ~ 150000 W (heating, water/gas, ethylene glycol/gas)

油冷器試驗： 800～9,300W（制熱，油/水、油/氣）

Oil cooler test: 800 ~ 9300 W (heating, oil/water, oil/gas)

中冷器試驗： 7,500～60,000W（制熱,氣/氣）

Cold machine test: 7500 ~ 7500 W (heating, gas/gas)

蒸發器、冷凝器風機試驗

Evaporator and condenser fan test

實車系統試驗

Real vehicle test system

2. 風量范圍：

2. Air volume range:

蒸發器A風洞： 80～1,200 m3/h

Evaporator A wind tunnel: 80 ~ 1200 m after/h

蒸發器C風洞： 110～1,500 m3/h

Evaporator C wind tunnel: 110 ~ 1500 m after/h

散熱器B風洞： 1,000～24,000 m3/h

Radiator wind tunnel B: 1000 ~ 24000 m after/h

出風口風量測試風洞： 3～250 m3/h

Outlet air flow test facilities: 3 ~ 250 m3 / h

3. 暖風裝置流量范圍： 3～30 L/min

3. The heater flow range: 3 ~ 30 L/min

4. 水箱散熱器流量范圍：30 ～ 200 L/min

4. Water tank radiator flow range: 30 ~ 200 L/min

5. 水溫范圍：65 ～ 90

5. The temperature range: 65 ~ 90

6.