1產品說明Product instructions

水泥基磨石材料是在面層彩色水泥自流平基礎上研發而成的一種高科技環保材料，該產品精選優質石英砂、彩色骨料、高品質特種水泥、高分子聚合物及各種高性能添加劑，經科學配比，計量，均勻混合而成。

Cement base grinding stone material is a high-tech environmental protection material developed on the basis of surface color cement self-leveling. The product selects high-quality quartz sand, colored aggregate, high-quality special cement, polymer polymers, and various high-performance additives. Scientific ratio, accurate measurement, Mix it evenly.

2產品性能Product performance

1.產品低碳、節能環保材料，防火等級A1。

Low-carbon, energy-efficient and environmentally friendly materials, fire grade A1.

2.與混凝土基層的良好粘結力，快干、速凝。

Good bonding force with concrete base, fast drying, fast coagulation.

3.的耐磨性能，高抗壓強度，且防滑性能好。

Super wear resistance, high compressive strength, and good Anti-Slip performance.

4.色彩絢麗、圖案精美、仿真性能強，質感高貴、典雅，盡可能表達設計師的設計想象。

Beautiful colors, exquisite patterns, strong simulation performance, noble texture, elegant, as far as possible to express the designer's design imagination.

5.表面致密，易清潔、易維護、易保養、耐沾污，抗化學腐蝕，經久耐用、光亮常新。

The surface is compact, easy to clean, easy to maintain, easy to maintain, resistant to contamination, resistant to chemical corrosion, durable, bright and new.

3技術參數Technical parameters

4產品應用Product types

1.城市設施：機場、火車站、博物館、科技館體育館、商業中心、購物中心、酒店會所、咖啡館等。

Urban facilities: airports, railway stations, museums, science and technology halls, business centers, shopping centers, hotel clubs, cafes, etc..

2.公共空間：學校、圖書館、醫院、辦公樓、健身房、停車場等。

S Public space: schools, libraries, hospitals, office buildings, gyms, parking lots, etc...

3.工業廠房：電子通訊、食品保健、煙草商行、大型超市、物流倉儲、飛機制造廠、火車制造廠等高端重工業場所。

Industrial plants: electronic communications, food health care, tobacco companies, large supermarkets, logistics storage, aircraft manufacturers, train manufacturers and other high-end heavy industry venues.

5產品優勢Product Advantages

1.良好的機械強度和硬度，耐磨性抗壓性能高，耐磨性是環氧地坪的4到8倍。

Good mechanical strength and hardness, high wear resistance, wear resistance is 4 to 8 times that of epoxy floor.

2.的密封抗?jié)B性能，可防油污及其他化學腐蝕性能，不起灰塵易清潔。

Permanent sealing impermeability, oil and other chemical corrosion protection, dust is easy to clean.

3.表面平整光潔亮麗，色彩絢麗、圖案精美，抗老化性極強，越磨越光亮。

The surface is smooth and beautiful, with brilliant colors and exquisite patterns. The anti-aging nature is extremely strong, and the more polished it is.

4.地面整體無縫，可色彩搭配，美觀感，高貴上檔次。

The whole ground seamless, can color collocation, Super aesthetic sense, noble upper grade.

5.施工周期短，表干后即可上人，7天后即可承載。

The construction period is short. After the watch is dry, it can be carried by the person and can be carried after 7 days.

6.無需打蠟只需清水拖地，使用年限長，表面致密、易清潔、維護和保養節約大量維護維修成本。

No need to wax only clean water mop, long service life, compact surface, easy to clean, maintenance and maintenance save a lot of maintenance costs.

7.產品所用材料無臭無害完全屬于正真綠色環保產品。

The odorless, non-toxic and harmless materials used in the products belong to the true green environmental protection products.

6施工工藝Product construction process

1.基層處理：將基層外表清洗潔凈，除去浮灰、油污及地面附著物，基層坑洼過多需用高強抗裂修補焊接砂漿補平。然后用清水將基面預先浸濕4小時，基面處于飽和面干狀態，無積水現象。

Grass-roots treatment: clean the surface of the grassroots, remove floating ash, oil and ground adhesion, the grass-roots pit too much need to use high strength anti-crack repair welding mortar. Then the base surface is soaked in water for 4 hours in advance. The base surface is in the state of saturated surface dry and there is no water accumulation.

2.涂刷界面層：運用界面劑的目的為了將基面密封及加強與基面的粘接力，從而避免從基面排氣到磨石層，構成氣泡產生。界面劑干燥后即可進行下一道工序。

Brush interface layer: The purpose of using interface agents is to seal the base surface and strengthen the adhesion to the base surface, so as to avoid venting from the base surface to the grindstone layer, forming bubbles. After the interface agent is dried, the next process can be carried out.

3.圖案分割：用2-4mm厚鋁條或銅條根據需求分隔區域，同時確定標高。

Pattern segmentation: Use a 2-4 M thick aluminum bar or copper bar to separate the area according to demand and determine the elevation.