HQZ（150L/180L）氣動水井鉆機（履帶）
Pneumatic Water Well Drilling Rig（Crawler）
HQZ系列水井鉆機是一種輕型、、多功能的鉆鑿孔設備，它主要適用于工、民鉆井、地溫鉆井，具有結構緊湊、進尺快，移動靈活 適用地域廣等優點。尤其適用與山區和巖石地層取水。
HQZ series water well drilling rig is a lightweight, efficient and multifunctionaldrilling equipment , it is mainly applicable to industrial and civil drilling, geothermal drilling, has the advantages of compact structure, fast advancing, mobile and flexible wide application region etc.. It is especially suitable for water intake in mountainous and rocky strata.
該鉆機可在不同地層上進行穿鑿工作，鉆孔直徑可達245-294mm。該鉆機采用新型液壓技術，配套大扭矩液壓馬達回轉以及大缸徑液壓油缸推進，名廠多缸發動機為液壓系統提供動力，兩級空濾以及空壓機進氣設計，延長柴油機的使用壽命。獨特的泵組設計方便維修，降低維修成本。集中控制的液壓操縱臺，方便操作。
The rig can create drilling jobs in different strata, borehole diameter can up to 245-294mm. The rig with hydraulic technology, supporting high torque hydraulic motor rotation and large bore hydraulic cylinder push, the multi cylinder engine of famous factory provides power for the hydraulic system, two stage air filter, air compressor air intake design, prolong the service life of diesel engine. Special pump set design is convenient for maintenance and reduce the cost of maintenance. Centralized control of the hydraulic control table, convenient operation.
該系列鉆機采用挖掘機履帶底盤，越野性能強。獨立的模塊設計，可使鉆機裝在卡車上，增加其機動性。兩檔回轉和推進速度可滿足在土層和巖層的不同穿鑿需要。組合式的定位器，可根據不同型號的鉆桿和沖擊器進行調整更換定位盤，保證定位定心準確、可靠。卷揚機構方便鉆桿和沖擊器的吊裝，降低勞動強度。
The series of drill rig adopts a excavator crawler chassis and has strong off-road performance. The independent module design allows the drill to be mounted on the truck to increase its mobility. Two speeds of rotating and advancing speed can meet the different needs of soil and rock drilling. Combined positioner, the positioning disc can be adjusted and replaced according to different types of drill pipe and impactor, so as to ensure the accuracy and reliability of the positioning and centering. The hoisting mechanism is convenient for hoisting of drill pipe and impactor, so as to reduce the labor intensity.
本機可適用各種地層，用于水井工程，地熱井，錨桿樁孔等，并可使用跟管鉆具。具有整機液壓控制，自動裝卸鉆桿，履帶式底盤，大馬力柴油機，四角液壓平衡，地形適用能力更強等優點。
This machine can be applied to various strata, used in water well engineering, geothermal well, anchor pile hole and so on, and can be used with follow-pipe drilling. It has the advantages of whole machine hydraulic control, automatic loading and unloading drill pipe, crawler type chassis, large horsepower diesel engine, four hydraulic support leg balance, stronger terrain application ability and so on.
技術參數：
Technical Parameters:
型號Model
HQZ150L
HQZ180L
整機重量（T )Overall weight
3.5
4.2
外形尺寸(mm )Dimension
3400*1500*2400
3800*1700*2350
鉆孔直徑（mm )Drilling diameter
130-245
130-294
鉆孔深度（m)Drilling depth
150
180
一次推進長度（mm )One-time advance length of the drill(mm)
3000
3000
行走速度（km/h )Traveling speed
2.5
2.5
單機爬坡能力（max )Climbing ability
25
30
小離地間隙（mm）Minimum Ground Clearance
250
250
工作氣壓（mpa ) Working Air Pressure
1.45 - 2.5
1.7-2.5
耗氣量I Pl3Zrain)Air consumption
15 - 27
15-27
主機功率（kw)Main machine power
42/云內 Yunnei
60/云內 Yunnei
回轉(rpm)