防撞墻模具類別上水平的鑄造模具廠不斷涌現。通過模具做出來的產品尺寸穩定，產

品之間誤差不超過1毫米，更容易受施工單位質檢部門驗收通過。由于模具的開發周

期都比較長，對于客人還是廠家來說，都致力于縮短模具周期，所以對于設備的運作

時間要求性高，模具加工設備基本上是24小時工作，對于加工設備提出了更高的要求

。模具加工精度高、表面質量好，生產效率很高，在模具模盒工業中的應用效果非常

好，采用很新技術設備生產產品，完全符合現代制造技術“率、高精度和高度自

動化”的發展方向，有廣闊的應用前景。

防撞墻模具是用鋼板焊接而成，鋼板本身具有強烈的抗壓性，抗腐蝕性，抗斷能力，

而所生產的檢查井正是得益于鋼模具所帶來的好處。為了更好的發展下去，鋼模具逐

漸達到國際要求，很多鋼模具銷往國外，逐漸的成為了市場很重要的一部分，歸于鋼

模具來說逐漸達到高標準模具，但對高標準模具鋼用戶提出的高要求，國產模具鋼新

品種少。作為生產廠家來說，需要不斷的增加市場銷量，為了更好的保障企業的運營

和市場的運營，需要加大培養這方面的人才，利用技術的革新改變企業的發展模式，

不斷提高對產品的研發與推廣，當務之急也要對產品的質量做進一步的提高。

The level of foundry mold factories in the category of anti-collision wall

molds are constantly emerging. The size of the products made through the

mold is stable, and the error between the products is no more than 1mm,

which is easier to be accepted by the quality inspection department of the

construction unit. Due to the long development cycle of molds, both

customers and manufacturers are committed to shortening the mold cycle, so

there are high requirements for the operation time of the equipment. The

mold processing equipment basically works 24 hours, which puts forward

higher requirements for the processing equipment. The mold has high

machining precision, good surface quality and high production efficiency.

It has a very good application effect in the mold box industry. Using very

new technology and equipment to produce products fully conforms to the

development direction of modern manufacturing technology "high efficiency,

high precision and high automation", and has broad application prospects.

The anti-collision wall mold is welded with steel plate. The steel plate

itself has strong compression resistance, corrosion resistance and

breaking resistance, and the inspection well produced benefits from the

benefits brought by the steel mold. In order to better develop, steel

molds gradually meet international requirements. Many steel molds are sold

abroad and gradually become a very important part of the market. Due to

steel molds, they gradually meet the high standard molds, but there are

few new varieties of domestic mold steel for the high requirements put

forward by high standard mold steel users. As a manufacturer, it needs to

continuously increase the market sales. In order to better ensure the

operation of the enterprise and the market, it is necessary to increase

the training of talents in this field, use technological innovation to

change the development mode of the enterprise, and continuously improve

the R & D and promotion of products. It is urgent to further improve the

quality of products.